Epoxy Product Application
Chemical resistant coatings, ceramic reinforced linings, and machinery grouts for severe industrial environments.
Applications · Singapore
Tank and vessel internals prepared and lined inside the turnaround window
Chemical, product, effluent and seawater tanks and vessels taken from failed lining to holiday-tested glass-flake lining by one crew: blasted where practical, bristle-blasted where not, with no spent media to remove.
The problem on site
Why this is done grit-free in Singapore
Tank re-linings in Singapore are planned around the programme. Every day of confined-space entry is a day of standby, and every kilogram of grit that goes in has to come out before the lining can go on. Flakecoat plans the job around the window: abrasive blasting for the open shell where the logistics allow, Bristle Blaster® preparation for nozzles, manways, internal structure and repair areas, and glass-flake vinyl-ester or polyester lining applied and holiday-tested by the same crew.
One contractor is then responsible for preparation, material and application, and the profile under the lining is documented.
For the specification
Typical figures
Sa 2½CleanlinessBlast or bristle-blast
60–100 µmProfile for glass-flakeVerified before lining
Holiday testHigh voltageEvery lining
1 crewPrep to hand-overOne warranty
How it is done
Method, step by step
Step 1
Arrange a survey
Step 2
Tools
Step 3
Glass-flake systems
Step 4
Request a quotation
Inspect
Lining survey & UTCondition of the existing lining, wall-thickness readings and access plan for confined-space entry.
Prepare
Blast + Bristle Blaster®Shell by abrasive blasting where practical; nozzles, structure and repairs by bristle blasting, leaving no residual media.
Line
Glass-flake vinyl ester / polyesterAirless-applied glass-flake system to the specified build; stripe coats on welds and edges.
Test & release
DFT · holiday testDry-film thickness and high-voltage holiday testing recorded and issued with the release.
Tools & consumables
Tools and systems used
FRP Application
Expertise in installing fiberglass matting for repair, protection and rebuilding of shafts, tanks, and pipes.
Glass Flake Reinforced Coating and Lining
Ultimate permeation barrier for aggressive chemicals and marine environments. Applicable to steel and concrete.
Urethane Based Application
Liquid and brushable urethane systems for castings, linings, and high-build rebuilding protection.
Where it applies
Related sectors
Questions
Common questions
Learn more about our heritage and the specialized services we provide.
How long does a tank re-lining take?
It depends on size, access and cure time; we quote a day-by-day programme with the price after the survey. Local material stock and a single crew keep standby to a minimum.
Which lining for seawater versus chemical service?
Glass-flake vinyl ester (NV6000) for chemical and seawater immersion; glass-flake polyester (P2000S) for less aggressive service and external shells. We confirm against the service conditions and the datasheet.
Can you work in a confined space?
Yes; our crews hold confined-space competencies and work to the site’s entry procedure with gas monitoring and extraction.
Send us the scope for a quotation within one business day
Photos, drawings or a site walk are enough to start. SGD pricing, tools and crews from Tuas.