Epoxy Product Application
Chemical resistant coatings, ceramic reinforced linings, and machinery grouts for severe industrial environments.
Product catalogue
Technologies & systems
Flakecoat coating systems and the complete MontiPower® range of grit-free surface preparation tools, belts, brushes and accessories.
Coatings & Linings
Coatings & Linings
FRP Application
Expertise in installing fiberglass matting for repair, protection and rebuilding of shafts, tanks, and pipes.
Glass Flake Reinforced Coating and Lining
Ultimate permeation barrier for aggressive chemicals and marine environments. Applicable to steel and concrete.
Urethane Based Application
Liquid and brushable urethane systems for castings, linings, and high-build rebuilding protection.
Bristle Blaster® Tools & Kits
Bristle Blaster® Tools & Kits
Bristle Blaster® Pneumatic (SP-647-BMC)
The industry standard for grit-free blasting. Simultaneously removes corrosion and generates anchor profile.
Bristle Blaster® Ultimate Cordless (SB-701-BMC)
Mobile performance with safety switch for difficult access. Powered by the Cordless Alliance System (CAS).
Bristle Blaster® Electric 900W
High-power 910W electric drive with dead-man switch. Ideal for continuous workshop use and production.
Bristle Blaster® Axial (SDB-601-BMC)
Engineered to remove corrosion in areas difficult to access such as door rabbets and roof joints.
Bristle Blaster® Ultimate Double
High-power double belt system treating up to 3m²/h per operator. Includes safety switch.
Bristle Blaster® Underwater (Cleantech)
Water hydraulic driven unit for subsea surface preparation grades comparable with Sa 2.5.
The Prepper Q4 (Quattro)
Wide surface grit-free technology up to 4x faster than conventional blasting.
Bristle Blaster® Ultimate Pneumatic Set — Double (SP-801-W-BMC)
Take surface preparation to the next level with the Bristle Blaster® Ultimate Pneumatic Set – Double. This provides a working...
Bristle Blaster® Double Electric Kit 220-240V, 50-60Hz, 910W
Ultimate Double Electric — twice the width, professional
Bristle Blaster® Cordless — Machine Only
The cordless Bristle Blaster® drive unit, ready for your CAS battery
MBX® Tools & Kits
MBX® Tools & Kits
MBX® Pneumatic Reverse Kit
Variable-speed pneumatic tool with reversible rotation — supplied as a complete, ready-to-work
MBX® Variomatic Electric 220-240V, 50-60Hz, 910W
The MBX® Ultimate Electric Variomatic (220-240V, 50-60Hz, 910W) delivers full variable-speed control with a dead-man's safety switch, protective…
MBX® Cordless — Machine Only
The MBX® cordless drive unit, ready to add to your existing CAS battery platform. Includes a dead-man's safety switch, protective...
MBX® Pneumatic Reverse
Variable-speed pneumatic tool with reversible rotation for full directional control on the
MBX® Variomatic Electric 220-240V, 50-60Hz, 910W — Heavy Duty
Variable speed. Heavy-duty drive. Total
MBX® Pneumatic (SP-201-BMC)
Whether you are panel beating, restoring vintage vehicles or simply requiring St2 or St3 surface cleanliness for coating, the MBX®...
Vinyl Zapper®
Vinyl Zapper®
Vinyl Zapper® Electric (SE-202-BMC)
Removes vinyl and adhesive residue without OEM paint damage. Patented German technology.
Vinyl Zapper® Ultimate Cordless Kit — Without Battery or Charger
The cordless way to lift vinyl and adhesive without harming the paint. Reduced rotation speed (1350 rpm) keeps the work...
Vinyl Zapper® Ultimate 30 (50 Sha)
Wear-free silicone compound for non-abrasive surfaces, with a working width of approximately 30 mm. The pack contains one Zapper. Built...
Vinyl Zapper® Wheel, 15 mm, Yellow
The 15 mm Vinyl Zapper® wheel removes vinyl, adhesive residue, reflective film, stickers, decals and double-sided tape — without damaging...
MBX® Vinyl Zapper® Ultimate Variomatic Kit
Removes vinyl, adhesive residues, reflecting foils, stickers, decals and double-sided adhesive tapeNo damage to paintworkVariable speed control for…
Decapower®
Decapower®
Decapower® Brush Adapter System, 23 mm, Grey Plastic
Adapter system sized for 23 mm (single) machines. Works with cordless and corded tools and stays compatible across machine generations....
Decapower® Bristle Head
Fit the Decapower® Bristle Head to any drill, cordless or corded. The built-in gear system drops the RPM to create...
Decapower® Brush, Steel, Green — Straight Bristles, 23 mm
Decapower® steel brush, green, with straight bristles (23 mm) for controlled, even surface preparation on the Decapower
Decapower® Brush, Steel, Green — Angled Bristles, 23 mm
Decapower® steel brush, green, with angled bristles (23 mm) for aggressive contact and faster material removal on the Decapower
Decapower® Drill Adapter for Brushes — 43 mm System, 4 Segments
Mount Decapower brushes to any drill. This 4-segment adapter (43 mm system) accepts a range of brush types (BU-041, BU-042),...
Decapower® Drill Adapter for Brushes — 43 mm System, 6 Segments
Mount Decapower brushes to any drill. This 6-segment adapter (43 mm system) accepts a range of brush types (BU-070, BU-076,...
Decapower® Multi-Purpose Drill Brush, Green, 43 mm
Turn any drill into a surface-prep tool. The Decapower® multi-purpose brush (green) runs Ø 0.7 mm steel bristles across 6...
Decapower® Multi-Purpose Drill Brush, Blue, 43 mm
Turn any drill into a surface-prep tool. The Decapower® multi-purpose brush (blue) runs Ø 0.58 mm steel bristles across 6...
MontiPower Belt, Green, Fine, 43 mm (4 Segments)
MontiPower fine belt for use with the MBX® drive unit and AS-001 adapter. Comes with a plastic insert which must...
MontiPower Belt, Blue, Coarse, 43 mm (4 Segments)
MontiPower coarse belt for use with the MBX® drive unit and AS-001 adapter. Comes with a plastic insert which must...
Multipurpose Belt, Blue, Stainless Steel, 43 mm (6 Segments)
MONTI multipurpose stainless-steel belt for use with the MBX® drive unit and AS-005
Belts & Brushes
Belts & Brushes
Bristle Blaster® Belt 23mm (10 pcs)
Standard 23mm carbon spring steel belts for Bristle Blaster® drive units.
Bristle Blaster® Belt 11mm (10 pcs)
Narrow 11mm carbon spring steel belts for difficult access areas.
Vinyl Zapper® Ultimate 30 (50 Sha)
Wear-free silicone compound for non-abrasive surfaces, with a working width of approximately 30 mm. The pack contains one Zapper. Built...
Vinyl Zapper® Wheel, 15 mm, Yellow
The 15 mm Vinyl Zapper® wheel removes vinyl, adhesive residue, reflective film, stickers, decals and double-sided tape — without damaging...
Decapower® Brush, Steel, Green — Straight Bristles, 23 mm
Decapower® steel brush, green, with straight bristles (23 mm) for controlled, even surface preparation on the Decapower
Decapower® Brush, Steel, Green — Angled Bristles, 23 mm
Decapower® steel brush, green, with angled bristles (23 mm) for aggressive contact and faster material removal on the Decapower
Decapower® Multi-Purpose Drill Brush, Green, 43 mm
Turn any drill into a surface-prep tool. The Decapower® multi-purpose brush (green) runs Ø 0.7 mm steel bristles across 6...
Decapower® Multi-Purpose Drill Brush, Blue, 43 mm
Turn any drill into a surface-prep tool. The Decapower® multi-purpose brush (blue) runs Ø 0.58 mm steel bristles across 6...
MontiPower Belt, Green, Fine, 43 mm (4 Segments)
MontiPower fine belt for use with the MBX® drive unit and AS-001 adapter. Comes with a plastic insert which must...
MontiPower Belt, Blue, Coarse, 43 mm (4 Segments)
MontiPower coarse belt for use with the MBX® drive unit and AS-001 adapter. Comes with a plastic insert which must...
Multipurpose Belt, Blue, Stainless Steel, 43 mm (6 Segments)
MONTI multipurpose stainless-steel belt for use with the MBX® drive unit and AS-005
Accessories & Spare Parts
Accessories & Spare Parts
MONTI Brush Adapter System, 23 mm
Adapter system for Bristle Blaster®, sized for 23 mm (single) machines. Works with cordless and corded tools and stays compatible...
MONTI Brush Adapter System, 11 mm
Adapter system for Bristle Blaster®, sized for 11 mm (single) machines. Works with cordless and corded tools and stays compatible...
MONTI Double Brush Adapter System
Double brush adapter system, 2 x 23 mm, for the Bristle Blaster® Double (46 mm). Run two brushes at once...
MONTI Adapter-System Screw for Connecting Two Brushes, 23 mm
The connecting screw that joins two 23 mm brushes for the Bristle Blaster® Double (46 mm) setup. A small part...
MONTI EasyLock Adapter, 23 mm
Change brushes in seconds, tool-free. The MONTI Easy-Lock system is built for MontiPower power tools so crews can swap bristles...
Decapower® Brush Adapter System, 23 mm, Grey Plastic
Adapter system sized for 23 mm (single) machines. Works with cordless and corded tools and stays compatible across machine generations....
Bristle Blaster® Protective Guard — Single
The original protective cover for single Bristle Blaster® machines. Compatible with both cordless and corded
Bristle Blaster® Protective Guard — Double
The original protective cover for double Bristle Blaster® machines. Genuine fit, reliable
Protective Guard with Air-Extraction Outlet — Bristle Blaster® Electric
Keep the work area clean and the operator protected. This dust-collection cover attaches to the new generation of MontiPower tools...
Protective Guard with Air-Extraction Outlet — Bristle Blaster® Pneumatic
Keep the work area clean and the operator protected. This dust-collection cover attaches to the new generation of MontiPower tools...
Protective Guard with Air-Extraction Outlet — Bristle Blaster® Electric Double
Keep the work area clean and the operator protected. This dust-collection cover attaches to the new generation of MontiPower tools...
Accelerator Bar, Bristle Blaster® 23 mm (Pack of 5)
Bristle Blaster® accelerator bar, steel, 23 mm — pack of 5. Compatible with carbon-steel
Need a recommendation?
Tell us about your substrate and environment and we’ll propose the right system.